Activity Stream

Re arranged a fill station a little bit.

You are correct. It is 110ci = 17cf.

Nice set up. That looks like a 110ci tank. Is there a hydro sticker on the other side of the tank? Aint it great. Fill our tanks as long as...

No its not normal at all. I am trying to figure out if you should send it back or not. Please email me your phone number and I will call you....

I think I'm just past my return period. Is this normal for a shoebox with 34-38 hours of running time?

By "replaced the pistons," I mean that I put them back in their running position.

You "replaced the pistons"? Did you remove the pistons all together? The lower c-clip is bent open and will no longer function properly and needs to...

I removed the lower c-clip to replace the lower white o-rings. I had never touched the top one. Is this normal for 34-38 hrs running time? I'll try...

Please send me a clear picture of the slots that the c-clips go into. You had never removed them and they both popped off simultaneously? Or did you...

There's black debris in the spaces. Are the outer black o-rings shot now too? I still haven't filled my tank to 4500 psi capacity yet.

somewhere above 4000 psi BOTH c-clips, top and bottom, popped off and the pistons moved left about an inch. I repositioned the pistons and clips but...

The inner-more of the two small, white o-rings was blown out. I figure that must have been why it shut off at 3800 psi on the first fill. The 97...

If it shuts off early around 2000 psi that is always a sign that the lower piston orings have a problem and are not pumping. Tom

suddenly i had the same problem, it was working perfect and then it shuts off at 1500 psi (i have the 4500psi model) shoud i have to replace the...

I've just gotta get a slightly dulled nerve hook and I'll be all set I hope! I'll keep you posted. Thank you for your time!

Bottom is exactly the same just smaller. Tom

Wow... Yes, sir. Is the bottom cylinder the same as the method for the top cylinder? Top is what the video shows.

The white orings in your lower cylinder have gone bad and need to be replaced. Try that first. Air running through the system when the pistons are...

With both pistons completely extended, once I vent the shoebox and remove my fill hose, air runs right through. that's when the shut off device is...

Got it to pressurize up to 3000 before it shut off this time. holds steady, no leaks. If I try to open the valve on my tank, even VERY slowly, it...

If you have a gauge on your hose, turn off the tank, fill the hose up until it stops and then watch the gauge to see if it looses pressure. Tom

I slid the shut off adjust thing right to the end of the rod too, to no avail.

I have the max model. The shop compressor golds a steady 85 psi for the precharge. The shoebox shuts off at 3000 psi orand less. It doesn't lose any...

Please explain how you loose air when you hook it up? What is your input pressure from the shop compressor? Do you have an F8 or the Max model? ...

Joe Brancato at AirTanksForSale.com is developing one now so you can ask him. Tom

Tom, Do you know where I can find a high pressure filter for the output side? I would like to price them to see what the cost is. Thanks.